Elevators were just starting to set off on the path towards becoming commonplace and machine rooms were viewed as being utterly indispensable for an elevator. However, the machine room-less elevator was ready to challenge all these probabilities as it was redesigning the very functioning of a normal elevator.
As is already known, there are only two types of passenger lift machine room less elevators: this is the traction elevator and the hydraulic elevator. It is not limited to one type but can be applied in both types and can be used without a machine room and thus considered a machine room-less lift.
Hexa Lifts focuses on Machine Room Less (MRL) Elevators, which are compact and cheaper than the traditional elevator systems that dominate modern construction.
Being customer-focused and innovative, Hexa Lifts offers you long-lasting, energy-efficient, and stylish MRL Lifts to suit your needs.
Machine-room-less elevator fittings have a gearless traction machine at the hoistway. Counterweight helps the machine rotate the elevator sheave, the device that lifts the cab through the hoist way.
MRL lift is most frequently used in hotels, apartments, multifunctional buildings, and commercial offices; it is capable of serving 2 to 25 floors (with a Reference Load of 2,100-5,000 lbs.,) and has high versatility of design.
Capacities more than 4000 lbs can take bulky cab finishes and may take even more than a single pull. posterity to the large carrying capacity of a lift truck a lift truck can have larger capacities of up to 4,000 lbs or more.
We are Hexa Lifts, and we are all about providing you with the best quality lifts that are optimized to meet your requirements.
● Load Capacity: Up to 1000 kg
● Max Height: 40 feet
● Speed: 0.5 m/s
● Power Supply: 415V, 3 Phase
● Warranty: 2 Years
● Installation Time: 35 Days
● Certification: ISO 9001
There are several advantages that can be expected from choosing a machine room-less elevator for your building.
● One of which is the precious space it does away with. The absence of a machine room can be very advantageous in meeting the needs of the building in which it is installed. This is the main reason for which many have come to the final decision to introduce this technology into their building.
● There is another powerful incentive to look for this specific MRL elevator because it also can save electricity, sometimes by 30% to 80% and therefore reduce costs. Today, there is no need to install a whole room full of equipment that needs a constant supply of electricity coming in and going out of the elevator.
● The machine room-less elevator also does not incorporate the use of any oil in its operations at all. This is a very big positive because it is less likely to cause accidents as compared to the other types of transport hence the extra safety makes the passengers feel more secure when using the transport.
● The machine room-less elevator has been known to be spectacularly suited for low-rise buildings since it is space-saving, time-efficient, and cost-efficient since there are fewer components and it is designed just for you. This new and improved elevator could really make your building more efficient and safer.
When machine room-less elevators descend with a heavy car load or ascend with a light car load (regenerative mode), the gearless traction machine acts as a power supply. While the power produced when traction machines are in operation is often lost as heat, the regenerative converter sends the power back to the distribution transformer as well as the electrical network of the building in addition to electricity from the power supply.
The machine room-less elevator system will be of particular interest to architects, builders, and interior designers because it offers more design flexibility. The overhead elevator machine room is not required — all machineries are installed successfully in the hoistway except the control panel which may be located at any distance up to 100 feet from the gearless traction machine. Further, a conventional machine room elevator imposes load stress on the structure of a building.
The size reduction of the traction machine allows for the gearless traction machine with a PM motor in a hoist way to contain driving devices typically installed in a machine room. In addition, the area of the hoist way is approximately the same as our conventional elevator — and that is for even more space efficiency.
MRL passenger lift, also known as Machine Room Less lift, is an elevator that does not require a machine room. The machinery is incorporated into the elevator shaft, which is a practical and economical design for most new construction buildings.
MRL lifts can be applied in residential, office, mall, hotel, and industrial buildings. They are suitable for use in facilities with confined space for conventional lift equipment.
Hexa Lifts MRL lifts are designed to support a load capacity of up to 1000 kg for 2 to 26 passengers, depending on the model and design of the lift.
Hexa Lifts also guarantees fast installation and normally takes a maximum of 35 days to install while observing standard safety and quality measures.
The price of a machine room-less lift will depend on the type, its capacity, and the degree of individual adjustments. Below are starting prices:
● 2-Passenger Lift: ₹4,00,000
● 4-Passenger Lift: ₹6,00,000
Yes, Hexa Lifts has numerous options, including interior finish, lighting, and doors, among others. There are options in glass panels, luxury metallic looks, and many others.
Hexa Lifts’ consultants will assist in choosing the lift most suitable for the traffic in your building type and budget. Please call or email us to learn more about our services or get a free quote.
A 2-year warranty accompanies all our passenger lifts to guarantee that you will enjoy a lift without faults.
© 2019, Hexa Lifts, All Rights Reserved
Design and Development by
Codeaart